1. Lay the sheet out with the hood at the top (head end) of your mattress.

2. Attach the top corners of the fitted sheet around the head end of your inflated mattress.

(If you have one of our a full-length sheets, you will attach the bottom corners of the sheet around the foot end of your mattress next.)

3. Clip and cinch the straps on the underside of the mattress.

TIP! For the half-length sheets, make sure you have the sheet pulled down taut so there is no loose fabric up near the hood. Cinch the straps tight to keep it securely in place.

The Fast Footbox™ features just one clip to quickly and easily transform it from mummy mode to wide mode.

You can clip the Fast Footbox™ for maximum warmth...

...or unclip it for maximum space and easy venting!

Scroll through all 7 steps to learn how to go from flat to wide mode to mummy mode.

1. Lay your quilt out with the lining facing up (Zenbivy logo will be facing down). Have the foot end closest to you.

2. Grab the GREEN loop in the lower left corner and bring it over to the matching GREEN clip on your right side. Clip that!

3. Folding the right side of the quilt in towards the left, locate the YELLOW clip and attach it to the matching YELLOW loop.

4. Locate the BLUE loop on the right corner of the quilt and attach it to the matching BLUE clip on your lefthand side.

5. On the inside of the footbox, locate both sides of the snap and snap them together.

6. Once snapped, fully cinch the drawstring to close up the footbox.

Voilà! You have successfully set up "wide mode" on your convertible quilt.

If needed on cold nights, transform the convertible footbox from "wide mode" for maximum space to "mummy mode" for maximum warmth.

To form mummy mode, simply clip the next two clips that run up the underside of the footbox—1 green, 1 yellow. You can choose to clip both, or just one.

1. Lay the quilt out on top of your sheet/mattress. The footbox should be at the foot end of your mattress and the Zenbivy logo should be face up.

2. Line up the 4 loops on the quilt with the color-coded clips that run along either edge of the sheet. Working your way from hip to head, clip in only as many as you need.

NOTE: You don't have to clip them all if you don't need to. Test it out and see what works best for you, your sleep style, and the conditions you're sleeping in.

1. Pop your inflated SoftTop™ Pillow into the sheet's hood.

2. Locate the 2 loops inside the hood and line those up with the clips on the pillowcase.

3. Clip it in!

1. Locate the cord lock and the tail end of the drawstring. Squeeze the cord lock and pull the loose end to create a gentle curve in the center of the quilt.

TIP! You don't need to cinch it too far, just enough to create a “hook” around your shoulders/neck. Play around with it and find what’s comfortable for you.

2. Once cinched, tuck the corner of the quilt back up into the hood to block all drafts.

To undo the curve, simply squeeze the cord lock and pull on the sewn-in end to straighten the top edge of the quilt again.